From 7a668de33290da2e405149adcce958dca2899d80 Mon Sep 17 00:00:00 2001 From: Přemysl Janouch Date: Sun, 26 May 2013 10:13:30 +0200 Subject: Initial commit --- CMakeLists.txt | 18 ++ config.h.in | 9 + sensei-raw-ctl.c | 578 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 605 insertions(+) create mode 100644 CMakeLists.txt create mode 100644 config.h.in create mode 100644 sensei-raw-ctl.c diff --git a/CMakeLists.txt b/CMakeLists.txt new file mode 100644 index 0000000..e34375c --- /dev/null +++ b/CMakeLists.txt @@ -0,0 +1,18 @@ +cmake_minimum_required (VERSION 2.8.4) +project (sensei-raw-ctl C) +set (project_VERSION "1.0") + +find_package (PkgConfig REQUIRED) +pkg_check_modules (dependencies REQUIRED libusb-1.0) +include_directories (${dependencies_INCLUDE_DIRS}) + +configure_file (${CMAKE_CURRENT_SOURCE_DIR}/config.h.in + ${CMAKE_CURRENT_BINARY_DIR}/config.h) +include_directories (${CMAKE_CURRENT_BINARY_DIR}) + +add_executable (${CMAKE_PROJECT_NAME} ${CMAKE_PROJECT_NAME}.c) +target_link_libraries (${CMAKE_PROJECT_NAME} ${dependencies_LIBRARIES}) + +include (GNUInstallDirs) +install (TARGETS ${CMAKE_PROJECT_NAME} DESTINATION ${CMAKE_INSTALL_BINDIR}) + diff --git a/config.h.in b/config.h.in new file mode 100644 index 0000000..d00c838 --- /dev/null +++ b/config.h.in @@ -0,0 +1,9 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#define PROJECT_NAME "${CMAKE_PROJECT_NAME}" +#define PROJECT_VERSION "${project_VERSION}" + +#endif /* ! CONFIG_H */ + + diff --git a/sensei-raw-ctl.c b/sensei-raw-ctl.c new file mode 100644 index 0000000..8e0c18b --- /dev/null +++ b/sensei-raw-ctl.c @@ -0,0 +1,578 @@ +/* + * sensei-raw-ctl.c: SteelSeries Sensei Raw control utility + * + * Everything has been reverse-engineered via Wireshark/usbmon and VirtualBox. + * Device configuration has been discovered by accident. + * + * The code might be a bit long but does very little; most of it is UI. + * + * Copyright (c) 2013, Přemysl Janouch + * All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "config.h" + +// --- Utilities --------------------------------------------------------------- + +/** Search for a device with given vendor and product ID. */ +static libusb_device_handle * +find_device (int vendor, int product, int *error) +{ + libusb_device **list; + libusb_device *found = NULL; + libusb_device_handle *handle = NULL; + int err = 0; + + ssize_t cnt = libusb_get_device_list (NULL, &list); + if (cnt < 0) + goto out; + + ssize_t i = 0; + for (i = 0; i < cnt; i++) + { + libusb_device *device = list[i]; + + struct libusb_device_descriptor desc; + if (libusb_get_device_descriptor (device, &desc)) + continue; + + if (desc.idVendor == vendor && desc.idProduct == product) + { + found = device; + break; + } + } + + if (found) + { + err = libusb_open (found, &handle); + if (err) + goto out_free; + } + +out_free: + libusb_free_device_list(list, 1); +out: + if (error != NULL && err != 0) + *error = err; + return handle; +} + +// --- Device configuration ---------------------------------------------------- + +#define USB_VENDOR_STEELSERIES 0x1038 +#define USB_PRODUCT_STEELSERIES_SENSEI 0x1369 + +#define GET_REPORT 0x01 +#define SET_REPORT 0x09 + +#define SENSEI_CTL_IFACE 0 + +#define SENSEI_CPI_MIN 0x01 +#define SENSEI_CPI_MAX 0x3f +#define SENSEI_CPI_STEP 90 + +/** Backlight pulsation. */ +enum sensei_pulsation +{ + PULSATION_STEADY = 1, + PULSATION_SLOW, + PULSATION_MEDIUM, + PULSATION_FAST +}; + +/** Device mode. */ +/* Just guessing the names, could be anything */ +enum sensei_mode +{ + MODE_COMPATIBILITY = 1, + MODE_NORMAL +}; + +/** Backlight intensity. */ +enum sensei_intensity +{ + INTENSITY_OFF = 1, + INTENSITY_LOW, + INTENSITY_MEDIUM, + INTENSITY_HIGH +}; + +/** Polling frequency. */ +enum sensei_polling +{ + POLLING_1000_HZ = 1, + POLLING_500_HZ, + POLLING_250_HZ, + POLLING_125_HZ +}; + +/** Overall device configuration. */ +struct sensei_config +{ + enum sensei_mode mode; + int cpi_off; + int cpi_on; + enum sensei_pulsation pulsation; + enum sensei_intensity intensity; + enum sensei_polling polling; +}; + +/** Send a command to the mouse via SET_REPORT. */ +static int +sensei_send_command (libusb_device_handle *device, + unsigned char *data, uint16_t length) +{ + int result = libusb_control_transfer (device, LIBUSB_ENDPOINT_OUT + | LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_INTERFACE, + SET_REPORT, 0x0200, 0x0000, data, length, 0); + return result < 0 ? result : 0; +} + +/** Set the operating mode of the mouse. */ +static int +sensei_set_mode (libusb_device_handle *device, + enum sensei_mode mode) +{ + unsigned char cmd[32] = { 0x02, 0x00, mode }; + return sensei_send_command (device, cmd, sizeof cmd); +} + +/** Set backlight intensity. */ +static int +sensei_set_intensity (libusb_device_handle *device, + enum sensei_intensity intensity) +{ + unsigned char cmd[32] = { 0x05, 0x01, intensity }; + return sensei_send_command (device, cmd, sizeof cmd); +} + +/** Set pulsation speed. */ +static int +sensei_set_pulsation (libusb_device_handle *device, + enum sensei_pulsation pulsation) +{ + unsigned char cmd[32] = { 0x07, 0x01, pulsation }; + return sensei_send_command (device, cmd, sizeof cmd); +} + +/** Set sensitivity in CPI. */ +static int +sensei_set_cpi (libusb_device_handle *device, + int cpi, bool led_status) +{ + assert (cpi >= SENSEI_CPI_MIN && cpi <= SENSEI_CPI_MAX); + unsigned char cmd[32] = { 0x03, led_status ? 2 : 1, cpi }; + return sensei_send_command (device, cmd, sizeof cmd); +} + +/** Set the polling frequency. */ +static int +sensei_set_polling (libusb_device_handle *device, + enum sensei_polling polling) +{ + unsigned char cmd[32] = { 0x04, 0x00, polling }; + return sensei_send_command (device, cmd, sizeof cmd); +} + +/** Save the current configuration to ROM. */ +static int +sensei_save_to_rom (libusb_device_handle *device) +{ + unsigned char cmd[32] = { 0x09, 0x00, 0x00 }; + return sensei_send_command (device, cmd, sizeof cmd); +} + +/** Read device configuration. */ +static int +sensei_load_config (libusb_device_handle *device, + struct sensei_config *config) +{ + unsigned char data[256]; + + int result = libusb_control_transfer (device, LIBUSB_ENDPOINT_IN + | LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_INTERFACE, + GET_REPORT, 0x0300, 0x0000, data, sizeof data, 0); + if (result < 0) + return result; + + config->intensity = data[102]; + config->pulsation = data[103]; + config->cpi_off = data[107]; + config->cpi_on = data[108]; + config->polling = data[128]; + return 0; +} + +// --- Control utility --------------------------------------------------------- + +static void +sensei_display_config (const struct sensei_config *config) +{ + printf ("Backlight intensity: "); + switch (config->intensity) + { + case INTENSITY_OFF: printf ("off\n"); break; + case INTENSITY_LOW: printf ("low\n"); break; + case INTENSITY_MEDIUM: printf ("medium\n"); break; + case INTENSITY_HIGH: printf ("high\n"); break; + default: printf ("unknown\n"); + } + + printf ("Backlight pulsation: "); + switch (config->pulsation) + { + case PULSATION_STEADY: printf ("steady\n"); break; + case PULSATION_SLOW: printf ("slow\n"); break; + case PULSATION_MEDIUM: printf ("medium\n"); break; + case PULSATION_FAST: printf ("fast\n"); break; + default: printf ("unknown\n"); + } + + printf ("Speed in CPI (LED is off): %d\n", 90 * config->cpi_off); + printf ("Speed in CPI (LED is on): %d\n", 90 * config->cpi_on); + + printf ("Polling frequency: "); + switch (config->polling) + { + case POLLING_1000_HZ: printf ("1000Hz\n"); break; + case POLLING_500_HZ: printf ("500Hz\n"); break; + case POLLING_250_HZ: printf ("250Hz\n"); break; + case POLLING_125_HZ: printf ("125Hz\n"); break; + default: printf ("unknown\n"); + } +} + +struct options +{ + unsigned show_config : 1; + unsigned save_to_rom : 1; + unsigned set_pulsation : 1; + unsigned set_mode : 1; + unsigned set_intensity : 1; + unsigned set_polling : 1; + unsigned set_cpi_off : 1; + unsigned set_cpi_on : 1; +}; + +static void +show_usage (const char *program_name) +{ + printf ("Usage: %s [OPTION]... - configure" + " SteelSeries Sensei Raw devices\n\n", program_name); + printf (" -h, --help Show this help\n"); + printf (" --version Show program version and exit\n"); + printf (" --show Show current mouse settings and exit\n"); + printf (" --mode X Set the mode of the mouse" + " (can be either 'compat' or 'normal')\n"); + printf (" --polling X Set polling to X Hz (1000, 500, 250, 125)\n"); + printf (" --cpi-on X Set CPI with the LED on to X\n"); + printf (" --cpi-off X Set CPI with the LED off to X\n"); + printf (" --pulsation X Set the pulsation mode" + " (steady, slow, medium, fast)\n"); + printf (" --intensity X Set the backlight intensity" + " (off, low, medium, high)\n"); + printf (" --save Save the current configuration to ROM\n"); + printf ("\n"); +} + +static int +encode_cpi (const char *str) +{ + char *end; + long cpi = strtol (str, &end, 10); + if (!*str || *end || cpi < 0) + { + fprintf (stderr, "Error: invalid CPI value\n"); + exit (EXIT_FAILURE); + } + + cpi /= SENSEI_CPI_STEP; + if (cpi < 1) + { + fprintf (stderr, "Notice: CPI too low, using %d\n", + SENSEI_CPI_MIN * SENSEI_CPI_STEP); + cpi = 1; + } + if (cpi > SENSEI_CPI_MAX) + { + fprintf (stderr, "Notice: CPI too high, using %d\n", + SENSEI_CPI_MAX * SENSEI_CPI_STEP); + cpi = SENSEI_CPI_MAX; + } + return cpi; +} + +static void +parse_options (int argc, char *argv[], + struct options *options, struct sensei_config *new_config) +{ + static struct option long_opts[] = + { + { "help", no_argument, 0, 'h' }, + { "version", no_argument, 0, 'V' }, + { "show", no_argument, 0, 's' }, + { "save", no_argument, 0, 'S' }, + { "mode", required_argument, 0, 'm' }, + { "polling", required_argument, 0, 'p' }, + { "cpi-on", required_argument, 0, 'c' }, + { "cpi-off", required_argument, 0, 'C' }, + { "pulsation", required_argument, 0, 'P' }, + { "intensity", required_argument, 0, 'i' }, + { 0, 0, 0, 0 } + }; + + if (argc == 1) + { + show_usage (argv[0]); + exit (EXIT_FAILURE); + } + + int c; + while ((c = getopt_long (argc, argv, "h", long_opts, NULL)) != -1) + { + switch (c) + { + case 'h': + show_usage (argv[0]); + exit (EXIT_SUCCESS); + case 'V': + printf (PROJECT_NAME " " PROJECT_VERSION "\n"); + exit (EXIT_SUCCESS); + case 's': + options->show_config = true; + break; + case 'S': + options->save_to_rom = true; + break; + case 'm': + if (!strcasecmp (optarg, "compat")) + new_config->mode = MODE_COMPATIBILITY; + else if (!strcasecmp (optarg, "normal")) + new_config->mode = MODE_NORMAL; + else + { + fprintf (stderr, "Error: invalid mode: %s\n", optarg); + exit (EXIT_FAILURE); + } + options->set_mode = true; + break; + case 'p': + if (!strcmp (optarg, "1000")) + new_config->polling = POLLING_1000_HZ; + else if (!strcmp (optarg, "500")) + new_config->polling = POLLING_500_HZ; + else if (!strcmp (optarg, "250")) + new_config->polling = POLLING_250_HZ; + else if (!strcmp (optarg, "125")) + new_config->polling = POLLING_125_HZ; + else + { + fprintf (stderr, "Error: invalid polling frequency: %s\n", optarg); + exit (EXIT_FAILURE); + } + options->set_polling = true; + break; + case 'c': + new_config->cpi_on = encode_cpi (optarg); + options->set_cpi_on = true; + break; + case 'C': + new_config->cpi_off = encode_cpi (optarg); + options->set_cpi_off = true; + break; + case 'P': + if (!strcasecmp (optarg, "steady")) + new_config->pulsation = PULSATION_STEADY; + else if (!strcasecmp (optarg, "slow")) + new_config->pulsation = PULSATION_SLOW; + else if (!strcasecmp (optarg, "medium")) + new_config->pulsation = PULSATION_MEDIUM; + else if (!strcasecmp (optarg, "fast")) + new_config->pulsation = PULSATION_FAST; + else + { + fprintf (stderr, "Error: invalid backlight pulsation: %s\n", optarg); + exit (EXIT_FAILURE); + } + options->set_pulsation = true; + break; + case 'i': + if (!strcasecmp (optarg, "off")) + new_config->intensity = INTENSITY_OFF; + else if (!strcasecmp (optarg, "low")) + new_config->intensity = INTENSITY_LOW; + else if (!strcasecmp (optarg, "medium")) + new_config->intensity = INTENSITY_MEDIUM; + else if (!strcasecmp (optarg, "high")) + new_config->intensity = INTENSITY_HIGH; + else + { + fprintf (stderr, "Error: invalid backlight intensity: %s\n", optarg); + exit (EXIT_FAILURE); + } + options->set_intensity = true; + break; + case '?': + exit (EXIT_FAILURE); + } + } + + if (optind < argc) + { + fprintf (stderr, "Error: extra parameters\n"); + exit (EXIT_FAILURE); + } +} + +static int +apply_options (libusb_device_handle *device, + struct options *options, struct sensei_config *new_config) +{ + int result; + if (options->show_config) + { + struct sensei_config config; + if ((result = sensei_load_config (device, &config))) + return result; + sensei_display_config (&config); + return 0; + } + + if (options->set_mode) + if ((result = sensei_set_mode (device, new_config->mode))) + return result; + if (options->set_polling) + if ((result = sensei_set_polling (device, new_config->polling))) + return result; + if (options->set_intensity) + if ((result = sensei_set_intensity (device, new_config->intensity))) + return result; + if (options->set_pulsation) + if ((result = sensei_set_pulsation (device, new_config->pulsation))) + return result; + + if (options->set_cpi_off) + if ((result = sensei_set_cpi (device, new_config->cpi_off, false))) + return result; + if (options->set_cpi_on) + if ((result = sensei_set_cpi (device, new_config->cpi_on, true))) + return result; + + if (options->save_to_rom) + if ((result = sensei_save_to_rom (device))) + return result; + + return 0; +} + +#define ERROR(label, ...) \ + do { \ + fprintf (stderr, "Error: " __VA_ARGS__); \ + status = 1; \ + goto label; \ + } while (0) + +int +main (int argc, char *argv[]) +{ + struct options options = { 0 }; + struct sensei_config new_config = { 0 }; + + parse_options (argc, argv, &options, &new_config); + + int result, status = 0; + + result = libusb_init (NULL); + if (result) + ERROR (error_0, "libusb initialisation failed: %s\n", + libusb_error_name (result)); + + result = 0; + libusb_device_handle *device = find_device + (USB_VENDOR_STEELSERIES, USB_PRODUCT_STEELSERIES_SENSEI, &result); + if (!device) + { + if (result) + ERROR (error_1, "couldn't open device: %s\n", + libusb_error_name (result)); + else + ERROR (error_1, "no suitable device found\n"); + } + + bool reattach_driver = false; + + result = libusb_kernel_driver_active (device, SENSEI_CTL_IFACE); + switch (result) + { + case 0: + case LIBUSB_ERROR_NOT_SUPPORTED: + break; + case 1: + reattach_driver = true; + result = libusb_detach_kernel_driver (device, SENSEI_CTL_IFACE); + if (result) + ERROR (error_2, "couldn't detach kernel driver: %s\n", + libusb_error_name (result)); + break; + default: + ERROR (error_2, "coudn't detect kernel driver presence: %s\n", + libusb_error_name (result)); + } + + result = libusb_claim_interface (device, SENSEI_CTL_IFACE); + if (result) + ERROR (error_3, "couldn't claim interface: %s\n", + libusb_error_name (result)); + + result = apply_options (device, &options, &new_config); + if (result) + ERROR (error_4, "operation failed: %s\n", + libusb_error_name (result)); + +error_4: + result = libusb_release_interface (device, SENSEI_CTL_IFACE); + if (result) + ERROR (error_3, "couldn't release interface: %s\n", + libusb_error_name (result)); + +error_3: + if (reattach_driver) + { + result = libusb_attach_kernel_driver (device, SENSEI_CTL_IFACE); + if (result) + ERROR (error_2, "couldn't reattach kernel driver: %s\n", + libusb_error_name (result)); + } + +error_2: + libusb_close (device); +error_1: + libusb_exit (NULL); +error_0: + return status; +} + -- cgit v1.2.3-70-g09d2